Base Tune

Don't be greedy. Share!Share on FacebookShare on Google+Tweet about this on TwitterEmail this to someone

Below is a base settings chart to help you set up your initial sag and adjustments.

  • OTT starts from 0 preload
  • Rebound settings starts from closed (slowest)
  • Compression settings start from wide open (least resistance)

 

Rider Weight Air Pressure OTT Rebound HSC LSC
120-139lbs. | 54-63 kg. 90-100 PSI 0-2 10-14 0-1 1-2
140-159 lbs. | 64-72 kg. 100-110 PSI 2-4 10-14 1-2 1-2
160-179 lbs. | 73-81 kg.  110-125 PSI 3-7 8-12 2-3 1-2
180-199 lbs. | 82-90 kg. 125-130 PSI 6-8 8-12 2-4 1-2
200-219 lbs. | 91-100 kg.  130-135 PSI 7-9 6-10 3-5 1-2
220-239 lbs. | 100-108 kg. 135-140 PSI 8-10 6-10 4-6 1-2
240+ lbs. | 109+ kg.  140-170 PSI 11-14 6-10 5-7 1-2
Remember that these are only starting points and adjustments will vary based on rider ability, trail conditions and personal preference.

After you are done setting up your suspension fork according to the recommended base settings, check your sag to make sure you are within the recommended sag settings. (see sag chart on the following page)