Hardware Installation
The Jade Coil comes equipped with high performance, low friction Igus bushings and mounting hardware specific to your frame manufacturer’s specifications. The Igus bushings contain a dry lubricant; they do NOT need to be lubricated.
1. Insert pin into upper and lower eyelet. Make sure the pin is spaced evenly in shock eyelet.
2. Insert hardware in the order shown. Apply a light layer of grease to the rubber O-Ring before putting on the mounting pin.
Spring Installation
Installing your spring correctly is extremely important for performance. If installed incorrectly, the shock can experience unnecessary wear.
1. Insert spring onto shock body. Make sure the spring is seated evenly on the preload collar. (upper eyelet shown)
2. Move the spring away from the lower eyelet by turning the preload collar. Then insert spring clip.